|
Post by felix on May 19, 2008 22:31:47 GMT 10
i'm with pij here bud,hell of alot that need's to work together to make a successful design especially in a tailess layout.maybe spend that money on something that already flies well (bee,beevo,duck etc) whilst flight testing your own design.comparing your own design to a well proven one will soon show what you may have to change and where you think you can improve yours.
|
|
|
Post by chamm37 on May 19, 2008 22:37:26 GMT 10
do any of you no of some1 that will be able to help me in doing so......the guy from wowings wont help me because it is to much hastle to set it up for just 1 or 2 planes to be built so i dunno any1 that will help me....
|
|
|
Post by chamm37 on May 19, 2008 23:06:22 GMT 10
yer it is a bit hard to do something that you really wont to do and you cant because you dont have any local knowledge or anything.....oh well i will put off for some more time and yer i will have to investigate if there is anyone localy for me.......
|
|
|
Post by Pij on May 19, 2008 23:10:43 GMT 10
I think, slowly and step by step, you'll get the advice you need, here on the forum. First step, there's going to be a LOT to learn getting the prototype to fly right. Wait till that's done before getting cores cut for a tail-less project. But in the meantime, you could build a more conventional plane with cores from a local cutter.
I'm in the same boat. I'd LOVE to build and fly my own tailless design. That will come, but not right away.
|
|
|
Post by chamm37 on May 20, 2008 17:24:58 GMT 10
hey get this.... the guy that i am talking to write wanst me to pay him $196 NZ for the plane to be cut and the wing cores to cut and come with them aswell......he is charging me for a 30kg block of EPP foam......i dont think that is wite for a model that is going to be like less than 1kg.....i mean yer come on
what do you guys think....
|
|
|
Post by Pij on May 20, 2008 18:14:19 GMT 10
30kg is a cubic metre. Enough for, what, 20 gliders?
|
|
|
Post by sean on May 20, 2008 18:36:52 GMT 10
Sounds to me like 30KG is the density, not the quantity!
|
|
|
Post by chamm37 on May 20, 2008 18:46:10 GMT 10
yer but still.......
|
|
|
Post by chamm37 on May 20, 2008 19:17:57 GMT 10
he is charging me $66 NZ for it but still it is a bit expensive
|
|