|
Post by chamm37 on Aug 6, 2009 20:36:01 GMT 10
Well here is some bed flying to you show my progress Still haven't figured completely how I am going to attack it to the wing yet. I was going to glue the fuse to the wing and have a hatch under the fuse to allow access to the battery compartment and electrics. I will be putting a servo in the wing to drive the rudder at the back. i haven't yet hinged it but there will be a rudder with a wheel at the back for those takeoffs and landings. Just got to figure out how to make it interchangeable with a rudder sort of thing for when i do water landings and stuff. Any ideas hope you like it so far Regards, Chris
|
|
|
Post by nick on Aug 6, 2009 21:19:55 GMT 10
sorry chris but i just don't get it how is that little rudder going to control a slow flying prop on a wing like that? my advice is look at how kymbo did his, his went well , he had a 3 cell 30c and thats a good battery, good luck mate. keep it simple chris regards nick
|
|
|
Post by chamm37 on Aug 6, 2009 21:25:58 GMT 10
it's only really for taxying on the ground mainly What i am going to do about the water landing stuff is that i will have the rudder in the air more so that the back wheel is out of the water. That should work. I'm just experimenting with some stuff and if all fails i will do the same as Kymbo and do the same fuse and stuff as his
|
|
Garth
> 100
wings are for wimps
Posts: 188
|
Post by Garth on Aug 6, 2009 21:53:29 GMT 10
Andrew can you delete my post its to big sorry.
Thanks Garth
|
|
|
Post by chamm37 on Aug 8, 2009 0:36:40 GMT 10
Well I have nearly finished the fuse and the rudder is nearly done as well. Have gotten it all hinged and the tail wheel installed and just needs to be hooked up to the servo and she is already ;D I can't find any landing gear around my place for the front wheels so i am either going to have to make a DIY wheels like i did with the tail wheel or wait for some money to come in and get some proper wheels from a hobby shop Will load up some more pics tomorrow. Regards, Chris
|
|