Extensive Mod Bee

[chamm37]

i have had my bee sitting in my cupboard all broken...
i had a look last night at it and assest the damage. The front of the nose is completly gone where the battery used to sit and from where the servos sit.....

So i have cut out that section of the plane so it looks like a mantaray thing now.....from where the carbon rods are to stiffen the bee up, around the servo,i have cut out to the LE....It is looking a litte weird now


I have got one of these hand launch glider kits things from model engines that you just chuck it and it glides....i am taking the fuse and boom off of that and making it into the plane so that it has a fuse and a boom on the plane.....The LE on the plane is now straight and like i said earlier on it is looking pretty stranage

I am going to make a horizontal stab out of balsa sheets glued together to glue on to the boom at the back of the boom. Sort of the same thing as the reaper has got..... i am going to use the same teckneque for up down and left and right by using the flaperion system(delta wing)

I will post some pics later on tonight to let ya know how it is all going but dont be suprised if it scares you a little ;Dhahahaha
let us know wat ya think allready


Regards,
Chris

[sean]

Hi Chris, sounds interesting. One thing to keep in mind is if you put a horizontal tail on it then the elevons definitely won't provide positive pitch control - you'll have to put an elevator on the horizontal tail.

[chamm37]

i mean the vertical stab on it......Same concept as the reaper sort of thing really so all i am doing is puttin a centre tail on it instead of the 2 side thingos ;D