|
Post by portfox on Aug 13, 2008 8:47:23 GMT 10
Any one in the forum have or know someone with a CNC cutter? I need to get some cores done soon.
Cheers
Steve
|
|
|
Post by thevon on Aug 13, 2008 19:24:23 GMT 10
Yes Glenn (Zipper) is well set up for that sort of thing. He has a lot of foils programmed I believe. He's currently making me up a new wing for the Minij, like a Prodij wing with a MG06 foil, cut with the CNC from blue foam. He's made cores for a few of the guys. There are a couple of other guys who do it too. Gerard had his first Ozprey cores done by a guy in Sydney - can't remember the name.
|
|
|
Post by portfox on Aug 14, 2008 8:35:39 GMT 10
Andy Thanks for the info, i found a 1:3.5 Scale ASW 28 fuselage for sale real cheap and grabbed it for my winter project next year. The ASW28's are brilliant thermalers, so i'll make it with the bridle setup for winching. All I need to get done are the cores from white foam, i'll cover them with 1mm ply and should be all good.
Steve
|
|
|
Post by skyboyken on Aug 14, 2008 23:02:28 GMT 10
You can also try Pete at Wowings,
he's good to deal with and local.
Ken.
|
|
|
Post by portfox on Aug 15, 2008 7:47:32 GMT 10
Ken Up at the sunshine coast, is that right? I'll give him a call.
S
|
|