Balancing the CG

[wag67]

This may be a simple question but being new to wings I have no idea what to do. I am building a Queen bee and in the instructions it says to set the CG at 14 inch from front. So i take it you need to balance it so it is level at 14in from front and if it needs some weight would i use a bit of lead and if so where do i put it as the wing is all taped up. What is the best way to go about it.

[Pij]

Here's how I balance mine:

windsock.proboards76.com/index.cgi?board=techaerotalk&action=display&thread=382&page=2

At the bottom of the "pencil" pic you can see the silver tape covering my ballast compartment. The compartment is cut as a triangular hole about 38mm back from the nose, so there's still plenty of foam ahead of the lead to absorb impacts.